Fork Lift Tynes Extensions

Calculate Shipping

2400mm Fork Extensions 3,550kg Class 2/3

These slippers will fit forklifts up to 4 Ton with maximum fork width 125mm & maximum thickness 50mm

Our 1800mm Fork Extensions comply with Australian standards and are a great solution for anyone looking to expand the capabilities of their forklift(s). We personally use these extensions in our own warehouse for long pallets, packages etc. and they really get us out of trouble quite frequently. Installation couldn't be simpler: it's just a matter of sliding them on and re-inserting the locking pins.

Dimensions (single): 2400mm x 145mm x 70mm
Pocket Size 130mm x 55mm
Package includes 2x fork extensions with locking pins
Easy installation onto existing fork tynes
Black finish
Each set has a compliance plate fitted with serial number and rated capacity
Complies with Australian Standard AS2359
Caution: Extensions should not exceed 50% x the length of the existing forks.

FULLY ENCLOSED BOX-SECTION

Our latest design fork tine extensions are made with thicker steel and are fully enclosed. This allows for a heavier lifting capacity, and greatly reduces any flex, compared to the common "u-type" or non enclosed extensions.

Caution

Extensions should not exceed 50% x the length of the existing forks..

Capacity is based on length of your fork tine.
For each 25mm of extension beyond fork, reduce capacity by:
* 77kg per 25 mm on 2000kg forklift
* 73kg per 25 mm on 2300kg forklift
* 70kg per 25 mm on 2500kg forklift

When using Fork Extensions, great care must be taken to ensure that they are used
only for load stabilizing purposes only (and not used for carrying the load).
It is important that the load on the Fork Extensions is uniform and that it is not carried
without full support of the appropriate fork tines.

(WSE-fe2400)